HomeSite MapSearchCheckout Store TopUp a LevelContact Us
Online Catalogue | For tool making supplies |
This kit is very logical and does not come with any instructions. Extreme in every way! Folder kit includes all necessary components including one of scales The embossed checkered bolsters are screwed to the liners, a designer hole pattern separates the bolster from the handle making fitting a breeze. The addition of an optional custom jeweled thumb opener will make this working man's knife the center of conversation. Overall length 7-3/4" opened, 4-5/8" closed, cutting edge is 3-1/8", .086" thick. Torx wrench #T10 & #T6, sold separately.
SPECIFICATIONSBLADE LENGTH: 9,5 cmHANDLE LENGTH: 11,5 cmOVERALL LENGTH: 21 cmBLADE THICKNESS: 3 mmBLADE WIDTH: 2,6 cmGRIND: FLATBLADE FINISH: SATIN FINISHBLADE SHAPE: DROP-POINTSTEEL: MOVA STEEL, C-0.59 / MN-0.5 / SI-0.36 / P-0.02 / S0.015 / CR-16.04 / VA-0.17 / MO-5.15HARDNESS: 54/56 HRcLOCKING MECHANISM: BACK LOCKSCALE FIXINGS: BRASSHANDLE MATERIAL: NOT SUPPLIEDPOCKET KNIFE WEIGHT: 80 grEXTRAS: LANYARD HOLE FOR SAFETY CORDKIT INSTRUCTIONS: INCLUDEDSKILL RATING: MODERATE
SPECIFICATIONSBLADE LENGTH: 9 cmHANDLE LENGTH: 11 cmOVERALL LENGTH: 20 cmBLADE THICKNESS: 3 mmBLADE WIDTH: 1.5 cmGRIND: FULL FLAT BLADE FINISH: SATIN FINISHBLADE SHAPE: STILLETTOSTEEL: MOLYBDENUM VANADIUMHARDNESS: 54/56 HRcLOCKING MECHANISM: FrictionHANDLE FIXINGS: MINI CORBY BOLT/PIVOT PIN AND 2.5mm BRASS RODHANDLE MATERIAL: RED PAPER MICARTAOVERALL WEIGHT: 70 grKIT INSTRUCTIONS: INCLUDEDSKILL RATING: EASY - MODERATE
The Stallion Lockback is the perfect gents-sized folder, slightly larger than the Mustang. With a 71-layer high contrast stainless damascus blade and matching bolsters, this lockback is a classic design with the attributes of a high-end collectible. Properly finished, this damascus steel folder will become an instant pocket knife star in your collection. The damascus blade on this model is 2.65" inches long and is pre-ground, etched and sharpened. The overall length of the Stallion Lockback is 7" inches and the length when closed is 4" inches. The matching stainless damascus bolsters are pre-drilled and mount with provided socket head stainless Torx screws. The damascus bolsters on this model are pre-radiused to assist with handle contouring. This kit comes with full hardware, including micro washers to insure smooth action. Comes with printed instructionsGeneral Kit SpecificationsStallion Lockback (damascus)Skill Rating: Level II-IIIBased on modification desire.Blade Steel: 71 Layer Stainless Damascus - (8cr13 core)(heat-treated/cryo-rtreated)Blade Edge Hardness: RC 56-58Closed Length: 4 in. (102mm) Blade Length: 2-5/8 in. (67mm)Overall Length: 7 in. (178mm)Lock bar/Backspine: Stainless SteelComes with Shim Stock.Scales: Milled to shape Woolly Mammoth Scales, predrilled and ready to fit
The GPC (Gents Pocket Carry) is a locking liner gents folder designed for the hobbyist that likes a sleek, more stylized design. This new kit will be made of the same high quality components as our other knifekits.com designer series exclusives, but will offer the maker the wider choice of modifications. It is designed to look good as a "high-tech" piece, such as pearl, exotic woods and with embellishments on the liners and bolsters.This folder kit is a premium kit product. All parts and fittings are precision machined. The liners on this kit are stainless steel and heat treated. The ball detent is in place, lock is pre-bent and the entire assembly has been personally inspected before shipping. The blade steel is AUS-8 and has been cryogenically treated to 56-58 rc. Satin bead blast finish only.Like all of our new gents folder designs, the GPC will not come pre-drilled on the bolster or liners for a clip. This was done because of the size of the folder and our community's desire to embellish the look of the knife, specifically engraving the bolsters. However, we offer a clip kit (above) that includes the clip needed for the GPC and the screws. General Kit SpecificationsSkill Rating: Level II-IVMechanism Type : Locking Liner Blade Steel: AUS-8 (Cryo-Treated)Blade Finish: Satin Bead BlastedBlade Length: 2.75 InchesHandle Length: 3.75 InchesOverall Length: 6.5 Inches Liners: Stainless Steel (Heat treated)Scales: 2 included templatesScales Not IncludedInstructions Included
The Pony Mid-lock damascus folding knife kit is designed to be as easy as it gets for building a truly high-line pocket knife. This damascus pocket knife kit model is a Mid-lock design and already has the handle scales pre-attached to their stainless liners by 2-part, 2-ton adhesive. The scales are already expertly finished to the outer edges of the stainless steel liners and little more than light sanding is needed to finish the handle work to a completed state. This helps the beginner to achieve a pro-level finish with little or no experience, tools or shop space. This damascus folding knife kit is a magnificent beginner's model, especially for those who want more than a screw-together challenge.The damascus blade on this model is 2" inches long and is pre-ground, etched and sharpened. The overall length of the Pony Mid-lock is 5" inches and the length when closed is 3" inches. This folder knife kit comes with full pin hardware, including nickel-silver liner pins for easy of assembly. The position of the lock on this model is excellent for a working pocket knife, even though it has a very dressy finish.General Kit Specifications: Instructions includedPony Mid-lock (damascus)Skill Rating: Level II-IIIBased on modification desire.Blade Steel: 71 Layer Stainless Damascus - (8cr13 core)(heat-treated/cryo-treated)Blade Edge Hardness: RC 56-58Closed Length: 3 in. (76mm)Blade Length: 2 in. (50mm)Overall Length: 5 in. (127mm)Handle Material: Pre-attached/Included (Black G-10)*Lock bar/Backspine: Stainless SteelComes with Shim Stock
Damascus Gambler Liner Lock Folder with Stainless Bolsters and Liners. A very easy kit to put together but will give stunning resultsOverall Length: 195mm Length closed 110mmLiners: Stainless Steel with threaded holesBlade Steel: 71 Layer Stainless Damascus - (8cr13 core)Bolsters: Stainless Steel, curved 2.75mm deepScales: Carbon Fibre Damascus Pattern. 2.9 x 32 x 80mm. Not cut to shape (Wear a mask when sanding)Fixing Screws Supplied: Heads 3.5mm Shaft 2.4mm
Please note if you decide to make a purchase you will be asked to confirm your age before you can proceed.
Closed Length: 4-1/2"Blade Length: 3-1/2"Blade Thickness: 7/64" Blade Material: Bead blasted, stainless steel (AUS-8)Handle Material: CocoboloTo confirm that you are over 18 years old, please enter your date of birth in the box below.
Make your own handles the way you like them with our simple approach. Our pre-machined scales are ready to start sanding.
The newly redesigned FL005 Framelock Folding Knife Kit includes all of the parts needed to create the above frame-lock pocket knife kit, including standard dymondwood handles. This kit assembles easily and offers a lot of canvas for modifications. This model is an excellent piece for filework training, testing liner treatments and for overlay experimentation. Because of the base simplicity, it is also a great kit for beginners, requiring no modification to produce a great knife. It features a fully stainless frame-lock design with open-spacer backspine. It is very fun to build and offers a great lockup and action.Printed Instructions IncludedSkill Rating: Level IBlade Steel: 440 Stainless (heat-treated to RC 56-58)Handle Length: 4 1/2Blade Length: 3 3/8Overall Length: 7 3/4Handle Material: Dymondwood (standard)Optional Handle Materials (available)Pivot: Stainless Steel (pass-through)Washers: Nylon Standard assembly requires TORX 6 and TORX 8 drivers.
The newly redesigned FL-006 Frame Lock Knife Kit includes all the parts needed to create the above pocket knife, including standard dymondwood handles (see image above). Optional handles are available. Use any knife handle scale blanks, or choose from the pre-milled versions that we offer. This knife kit assembles easily and offers a lot of working canvas for modifications and embellishments. This is an excellent design for filework training, liner test treatments and for overlay experimentation. Because of the project's simplicity, this is also a great knife kit for beginners, requiring no modification to produce a great pocket knife. Basic Printed Instructions IncludedThis model features a fully stainless steel frame-lock design with open-spacer backspine. This project is a fun build great precision and action. General Kit SpecificationsSkill Rating: Level IBlade Steel: 440 (heat-treated to RC 56-58)Handle Length: 4 1/2Blade Length: 3 3/8Overall Length: 7 3/4Handle Material: Dymondwood (standard)Optional Handle Material (available)Pivot: Stainless Steel (pass-through)Washers: NylonRequires T6 and T8 TORX drivers for basic assembly.
All parts included to create the above frame-lock folder kit, including standard cocobolo handles. This kit assembles easily and offers plenty of scope for modifications. This is an excellent piece for learning basic assembly, frame-lock design, file work training, liner test treatments and overlay experimentation. Because of the base design simplicity, it is also a great kit for beginners, requiring no modification to produce a great knife. Full stainless frame-lock design with open-spacer backspine. This model is a super value, and a fun build with nice lockup and action for the money!General Kit SpecificationsSkill Rating: Level IBlade Steel: 440 Stainless (RC 52-55)Handle Length: 4 1/2"Blade Length: 3 1/4"Overall Length: 7 5/8"Handle Material: CocoboloPivot: Stainless Steel (pass-through)Pocket Clip : Stainless (standard)Washers: Nylon
The newly redesigned DDR3 series button lock knife kit offers the advanced kit builder more options in artistic design modification and mechanical performance than any other folding knife kit on the market. Designed to be the finest quality folding knife kit available, and with the added functionality and versatility of the button lock opening system, one will be hard pressed to find a better knife for the money, and one more fun to build and operate.The DDR3 button lock knife kit comes standard with a 600 grit satin finished 400 stainless blade and pre-radiused bolsters, 400 stainless hardware and satin finished liners for a high-strength precision fit and finish. The hardened 440 stainless steel moderning bowie style blade is precision fit and highly sharpened right out of the box. With extreme quality fit & finish throughout, the DDR3-BL folding knife kit model offers a choice for the knife kit builder that allows the creation of a perfect knife for the job. It is also a favorite of kit builders who offer them as commissioned project pieces.This folding knife making kit model comes with all of the parts necessary to build the base model design, with the exception of handle materials. The liners have been pre-channeled for a user-created slide safety if desired. The safety slide button is not included with the button lock knife kit, but can be easily created from typical shop materials. The DDR3-BL model ships standard as a manually opening folding knife.General Kit SpecificationsSkill Rating: Level II-IVMechanism Type : Button LockBlade Steel: 440C Stainless (Heat/Cryo-Treated) RC 56-58Blade Finish: 600 Grit SatinBlade Styles: Tactical Grind w/Thumb RestBlade Length: 3.60 InchesClosed Length: 4.50 InchesOverall Length: 8.10 InchesLiners: Stainless Steel (Heat treated)
Premilled scales to fit Camper blades, ready to be attached, complete with liners and Corby Bolts.
Premilled scales, glued red liners.Corby rivets brass small and standard head, instructions included.Also fits the Enzo Fisher blade.
Pre drilled to accept Corby Bolts, Black G10 with Red Liners and Brass Corby Bolts.Instructions included.
Pre drilled to accept Corby Bolts, Green Canvas Micarta with Red Liners and Brass Corby Bolts.Instructions included.
Pre drilled to accept Corby Bolts, Desert Ironwood with (optional Red Liners) and Brass Corby Bolts.
Pre drilled to accept Corby Bolts, White Paper Micarta with Red Liners and Brass Corby Bolts.Instructions included.