HomeSite MapSearchCheckout Store TopUp a LevelContact Us
Online Catalogue | For tool making supplies | Blades for Hunting, Bushcrafting, Fishing and Collecting |
Please note if you decide to make a purchase you will be asked to confirm your age before you can proceed.
OUT OF STOCK
Satin finish 440 Stainless Steel with a slight hollow scandi grind.Dimensions: 220 x 95 x 28 x 3.2 mmTo go with it a well made brass finger guard that has been finished to match blade, supplied with a fixing pin. All you need to do is polish and buff up.The holes will accept Corby Bolts or 1/4 inch Rod the smaller holes will accept 3mm rodsThis will make up into a beautiful knife.To confirm that you are over 18 years old, please enter your date of birth in the box below.
Total length: 187 mmBlade length: 82 mmThickness: 2.8 mm
Blade length: 165 mmBlade width: 29,5 mmBlade thickness: 4,8 mmTotal: 305 mmSteel: 440C StainlessBolster: -Holes: 2 x 2,3mm, 3 x 5mm
Blade length: 120 mmBlade width: 30 mmBlade thickness: 3 mmTotal Lenght: 250 mmSteel: Stenco LeukuGrind: ScHoles: Corby: 4,6mmLanyard: 6mmThese blades comes with a plastic liner and a Made in Finland stamp on the back.They got a well made rough finish.
A knife blade to be used for bushcrafting, camping, skinning and chopping. One of the best all round compromises.The Enzo scales fit the Nessmuk knife blade.Blade length: 125mmBlade width: 25-35mmBlade thickness: 3.8mmTotal: 235mmSteel: 80 CrV2 (HRC 58-59)Holes 2 x 4.55 1 x 6.3 mmGeorge Washington Sears (December 2, 1821 - May 1, 1890) was a sportswriter for Forest and Stream magazine in the 1880s and an early conservationist. His stories, appearing under the pen name, "Nessmuk" popularized self-guided canoe camping tours of the Adirondack lakes in open, lightweight solo canoes and what is today called ultra light camping or ultra light backpacking. He took his pen name from a Native American who had befriended him in early childhood.
Length: 6-7/8"Blade Thickness: 7/64"Blade Material: AUS-8 Stainless Steel mirror finishFixing holes: 6 x 2mmWith new thumb grip on top edge.
Blade Material: AUS-8 Stainless. Satin finishLength: 83mmDepth: 26mmBlade Thickness:3mmTotal Length: 186mmFixing holes: 6 x 3mmCould be used as a Throwing Knife or adapted as an Oyster Knife (the tip would need blunting)
Length: 73mmOverall Length: 185mmBlade Thickness: 3mmBlade Material: AUS-8 Stainless Steel mirror finishFixing holes: 5 x 2mmWith thumb grip on top edge.
Length: 82mmOverall length 205mmBlade Thickness: 4mmBlade Material: D2 Steel Satin FinishGrind: Scandi Slightly Hollow (needs honing)Fixing: 2 Holes will accept Corby and Lovelace BoltsLayard Hole: 6.35mmTo confirm that you are over 18 years old, please enter your date of birth in the box below.
Dimensions:Total length: 230 mmBlade length: 115 mmThickness: 4 mm.
Dimensions:Blade length: 90 mmBlade width: 36 mmBlade thickness: 3 mmTotal: 220 mmSteel: 440CBolster: -Holes: 9 x 2,5 mm3 x 6,6 mm
Dimensions:Blade length: 70 mmBlade width: 24 mmBlade thickness: 3 mmTotal: 180 mmSteel: 440CBolster: -Holes: 6 x 2,5mm1 x 6,6 mm
Dimensions:Blade length: 75 mmBlade width: 20 mmBlade thickness: 3 mmTotal: 160 mmSteel: 440CBolster: -Holes: 6 x 2,5 mm1 x 6,6 mm
Dimensions:Blade length: 100 mmBlade width: 26 mmBlade thickness: 2,75 mmTotal: 187 mmSteel: -Bolster: -Holes: 1 x 8,8x3,5mm, 1 x 3,4mm, 1 x 6mm
Very Similar to the Cheyenne Blade but with a more upswept blade.Dimensions:Total length: 230 mmBlade length: 115 mmThickness: 4 mm.Fixing Holes: two or three. the third copuld be use as a Lanyard.Fixing bolts: Loveless and Bull Bolts. The holes can be filed out to take Corbies.
FROM CONDORBLADE MATERIAL: 3 mm -1075 HIGH CARBON STEELBLADE LENGTH : 2 3/32"BLADE FINISH: Epoxy Black Powder CoatingHANDLE: Can be covered with Para Cord or scales attached (requires new sheath if scales added).SHEATH:Kydex and Ball ChainHand crafted in El Salvador by people who care.
DIMENSIONSTotal Length: 172mmBlade Thickness: 3mmBlade length: 70mmBlade Material: AUS-8 Stainless Steel mirror finish.Grind: Scandi with slight concave and secodary bevel.Thumb grip on top edge: 15mm.
DIMENSIONSBlade: 93mmTotal length: 202mmThickness: 4mmGrind: Scandi with a small secondary bevel sharpenedSteel: 440c Stainless SteelFixing Holes: 2 for Corby or Bull Bolts to fix scales. With a 6.35mm Lanyard Hole.
Dimensions:Total length: 187 mmBlade length: 87 mmThickness: 3 mmStainless Steel.
440C satin finish 155 x 60 x 33 x 2.8mm.
Overall length: 6-1/2"Blade length: 2-1/2" Blade width: 1-1/8" Blade Thickness: 1/8" Handle Holes: 3/16" Thong Hole: 3/16" 440c steel. HRC 57-58.
Overall length: 7-3/16" Blade length: 3-1/4" Blade width: 1-1/16" Blade Thickness: 1/8" Handle Holes: 3/16" Thong Hole: 3/16" HRC 57-5. Steel 440C.
Blade length: 95 mmBlade width: 25 mmBlade thickness: 2,75 mmTotal: 185 mmSteel: -Bolster: -Holes: 1 x 8,8x3,45, 1 x 3,4, 1 x 5,9
A nice little knife with some file workDIMENSIONSTotal Length: 142mmBlade Thickness: 3.5mmBlade length: 55mmBlade Material: AUS-8 Stainless Steel Satin finish.Grind: Scandi with slight concave and secodary bevel.File work on top edge. More... To confirm that you are over 18 years old, please enter your date of birth in the box below.
Length: 70mmOverall length 165mmBlade Thickness: 3mmBlade Material: AUS-8 Stainless Steel mirror finishA neat simple blade with a choice of holes for scales that will accept Corby and Lovelace boltsTo confirm that you are over 18 years old, please enter your date of birth in the box below.
Length: 70mmDepth: 30mmOverall length: 165mmBlade Thickness: 3mmBlade Material: AUS-8 Stainless Steel satin finishA neat simple blade with a choice of holes for scales that will accept Corby and Lovelace bolts
Dimensions and SpecificationsSteel: 1095 Carbon SteelStyle: Fultang like a Tripe Knife but smallerCutting edge: 80mmDepth: 23mmGrind: ScandiThickness: 3mmOverall Length including bull nose: 227mmFixing: Holes will accept Corby, Loveless and Bull Bolts.
Dimensions and SpecificationsSteel: D2 SteelStyle: Fultang like a Tripe Knife but smallerCutting edge: 80mmDepth: 23mmGrind: ScandiThickness: 2.5mmOverall Length including rounded nose: 227mmFixing: Holes will accept Corby, Loveless and Bull Bolts.
Dimensions and SpecificationsSteel: Stainless SteelStyle: Fultang taperedCutting edge: 60mmDepth: 22mmGrind: Flat with small secondary bevelThickness: 4mm in the centre tapering to 1.5mmOverall Length: 165mmFixings: Holes will accept Corby, Loveless and Bull Bolts.
The EZSmith brand Boot Skinner Kit is a very high quality modern boot knife/skinner combo design. It will work well as a compact skinner and/or a concealable boot knife with a tactical handle treatment. This model is 6" overall with a 2-3/4" blade. It also comes standard with stainless steel bolsters and matching ss pins to allow for the perfect builder option design. The blade thickness is .117" (almost 1/8") and feels great in the hand. The blade is made from AUS8 and is hollow ground. This design features (2) .125" bolster holes, (2) .156" tang holes and a .250" thong hole for handle construction options. Dimensions:General Kit SpecificationsBoot SkinnerSkill Rating: Level II Blade Steel: AUS8 stainless steelRC = 56-58(Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: SatinBlade Length: 2.75 InchesOverall Length: 6 Inches Blade Width: 7/8Thickness: .110-.112
A really exceptional blade with a hammer finish to the top giving it a great rustic look and a matt finishDimensions: 95 x 30 x 5mm, total length 200mmSpecial hammer finished D2 Steel, with a slightly convex scandi grind, finished with a very small bevel. the holes will take Corby, Lovelace and Bull Bolts.
Polished 440 Stainless Steel. This sits very well in the palm of your hand.Dimensions: Cutting edge 75mm, total length 192mm, thickness 3.95mm, Depth 32mm. Scandi Grind which is slightly hollow and a secodary bevel.Holes will accept Corbys, Loveless and Bull Bolts.
A good value blade manufactured by Condor and marked with their name.BLADE MATERIAL: 2.5 mm -1075 HIGH CARBON STEELBLADE LENGTH: 105mmTOTAL LENGTH: 225mmBLADE FINISH: Blasted SatinGRIND: Scandi to zero.
Dimensions: Blade: 105 x 27 x 4mm. Overall Length 230mmThickness: 4mmSteel: D2Finish: SatinGrind : Scandi with a small secondary bevelThe holes will accept 1/4" Corby, Bull and Loveless BoltsVery good smooth outline, this will make up into a beautiful knife.
Dimensions: Blade: 105 x 27 x 4mm. Overall Length 230mmThickness: 4mmSteel: D2Finish: SatinGrind : Scandi with a small secondary bevelThe KIT: Predrilled Pink Ivory Scales to accept 1/4" Corby Bolts, black polycarbonate liners, profile guides for Tapered and Bolttle scales.
440C satin finish 163 x 80 x 44 x 2.5 mm.