HomeSite MapSearchCheckout Store TopUp a LevelContact Us
Online Catalogue | For tool making supplies | Blades for Hunting, Bushcrafting, Fishing and Collecting |
Please note if you decide to make a purchase you will be asked to confirm your age before you can proceed.
OUT OF STOCK
Satin finish 440 Stainless Steel with a slight hollow scandi grind.Dimensions: 220 x 95 x 28 x 3.2 mmTo go with it a well made brass finger guard that has been finished to match blade, supplied with a fixing pin. All you need to do is polish and buff up.The holes will accept Corby Bolts or 1/4 inch Rod the smaller holes will accept 3mm rodsThis will make up into a beautiful knife.To confirm that you are over 18 years old, please enter your date of birth in the box below.
Total length: 187 mmBlade length: 82 mmThickness: 2.8 mm
Blade length: 165 mmBlade width: 29,5 mmBlade thickness: 4,8 mmTotal: 305 mmSteel: 440C StainlessBolster: -Holes: 2 x 2,3mm, 3 x 5mm
Blade length: 120 mmBlade width: 30 mmBlade thickness: 3 mmTotal Lenght: 250 mmSteel: Stenco LeukuGrind: ScHoles: Corby: 4,6mmLanyard: 6mmThese blades comes with a plastic liner and a Made in Finland stamp on the back.They got a well made rough finish.
A knife blade to be used for bushcrafting, camping, skinning and chopping. One of the best all round compromises.The Enzo scales fit the Nessmuk knife blade.Blade length: 125mmBlade width: 25-35mmBlade thickness: 3.8mmTotal: 235mmSteel: 80 CrV2 (HRC 58-59)Holes 2 x 4.55 1 x 6.3 mmGeorge Washington Sears (December 2, 1821 - May 1, 1890) was a sportswriter for Forest and Stream magazine in the 1880s and an early conservationist. His stories, appearing under the pen name, "Nessmuk" popularized self-guided canoe camping tours of the Adirondack lakes in open, lightweight solo canoes and what is today called ultra light camping or ultra light backpacking. He took his pen name from a Native American who had befriended him in early childhood.
Length: 6-7/8"Blade Thickness: 7/64"Blade Material: AUS-8 Stainless Steel mirror finishFixing holes: 6 x 2mmWith new thumb grip on top edge.
Blade Material: AUS-8 Stainless. Satin finishLength: 83mmDepth: 26mmBlade Thickness:3mmTotal Length: 186mmFixing holes: 6 x 3mmCould be used as a Throwing Knife or adapted as an Oyster Knife (the tip would need blunting)
Length: 73mmOverall Length: 185mmBlade Thickness: 3mmBlade Material: AUS-8 Stainless Steel mirror finishFixing holes: 5 x 2mmWith thumb grip on top edge.
Length: 82mmOverall length 205mmBlade Thickness: 4mmBlade Material: D2 Steel Satin FinishGrind: Scandi Slightly Hollow (needs honing)Fixing: 2 Holes will accept Corby and Lovelace BoltsLayard Hole: 6.35mmTo confirm that you are over 18 years old, please enter your date of birth in the box below.
Dimensions:Total length: 230 mmBlade length: 115 mmThickness: 4 mm.
Very Similar to the Cheyenne Blade but with a more upswept blade.Dimensions:Total length: 230 mmBlade length: 115 mmThickness: 4 mm.Fixing Holes: two or three. the third copuld be use as a Lanyard.Fixing bolts: Loveless and Bull Bolts. The holes can be filed out to take Corbies.
FROM CONDORBLADE MATERIAL: 3 mm -1075 HIGH CARBON STEELBLADE LENGTH : 2 3/32"BLADE FINISH: Epoxy Black Powder CoatingHANDLE: Can be covered with Para Cord or scales attached (requires new sheath if scales added).SHEATH:Kydex and Ball ChainHand crafted in El Salvador by people who care.