HomeSite MapSearchCheckout Store TopUp a LevelContact Us
Online Catalogue | For tool making supplies |
OUT OF STOCK
1 Oz Bottle with CapPenetrating formulaFast cureGood for treating porous woodsSuperior wicking action.
1 oz Tube. Great for filling larger gaps in blocks that have minor cracks and pitting, really good with heavy burls and spalted woods. Also can be used in sheath making to enure that rivets and snaps do not come apart.General Instructions: Apply glue to one surface press together for 15 seconds which will create the inital bond, full cure in 24 hours. Best kept in the fridge.
A must for any knifemakers glue shelf. Special gap filling formula, Bonds virtually anything, works on oily surfaces. Especially good for sheath making1oz (28.3g)Once opened this should be stored in a fridge.
A must for any knifemakers glue shelf. Special gap filling formula, Bonds virtually anything, works on oily surfaces. Especially good for sheath making1/4ozOnce opened this should be stored in a fridge.
2 x 4oz bottles perfect for quick bonding of Endcaps and Mosaic PinsOnce opened this should be stored in a fridge, but bought to room temperature 65F before use.
2500 psi StrengthCan be tinted with pigments30 minute set time - 8 to 12 hour cure timeWaterproof2 x 14g tubes.
2500 psi StrengthClearCan be tinted with pigments30 minute set time - 8-12 hr hour cure timeWaterproof47 Fl. Oz (14ml)
2500 psi StrengthClearCan be tinted with pigments30 minute set time - 8-12 hr hour cure timeWaterproof84 Fl. Oz (25ml)
1800 psi StrengthWhite15-30 minute handling time, 1-2 hour set time, 24 hr hour cure timeBonds Underwater - bends without breaking84 Fl. Oz (25ml)
A new Resin 4oz Kit from the USA.BladeBond Ultra is an unadulterated high performance Polyamine based epoxy system designed to give superior results under extreme conditions. BladeBond Ultra exhibits outstanding permanence on a wide variety of surfaces including hard to bond substrates like oily woods and some thermoplastics. BladeBond Ultra will NEVER shrink and is formulated to retain flexibility under all environmental circumstances. Ultra is measured and mixed in a convenient 1:1 ratio by volume, and has a pot life of 45 min, at 70 degrees Fahrenheit. Usable cure is achieved in 12 hours, but can be force cured at 125 degrees in 2 hours.. When fully cured BladeBond Ultra can be machined, drilled and tapped, and is totally immune to, and unaffected by water, rot and most common solvents and chemicals. We have tested this product in our workshop and it works especially well when bonding Woolly Mammoth Ivory to Damascus Fultang blades. Any excess resin can be removed with Acetone before it cures.