130 gram Bar.

A high grade finishing compound. Top class finish on metals. Should be used as a thrid stage finishing compound, good for stainless steel.

It can also be used on Aluminium, Brass, Zinc, Titanium, Carbon Steel, and Bronze.

Generally use loose or stitched mops.

More...

130 gram Bar.

A cutting compound. To be used on all metals, this compound has a good cut and will still leave a reasonable finish. It contains a special grease that binds the abrasive to the mop. A popular mid range compound.

Generally use Sisal or Stitched mops.

More...

130 gram Bar.

Produces a good gloss but the compound also has some cut. Commonly used as a thrid stage finishing compound.

It can used on Aluminium, Brass, Zinc, Titanium, Carbon Steel, and Bronze.

Generally use loose or stitched mops.

More...

150 gram Bar. Super Finish

A high grade finishing compound. Top class finish on all metals, plastics, lacquers and resins, use as a third or 4th stage finishing compound.

Also works well on wood.

Generally use loose or stitched mops.

More...

130gram. Tripoli compound for first process cutting on softer metals, do not use tripoli compounds on hard metals ie steel, stainless and iron.
What metal is it for? Precious metals, brass, copper, aluminium, bronze.
What mop should I use? Precious metals loose & open and close stitch white mops.
Brass, copper, zinc, aluminium etc use with a white or colour mop.
Cut factor 6 Gloss factor 5

More...

130gram Bar

What is this compound? High grade Brushing/Cutting Compound.
First stage polishing compound.
What metals is it for? Steel, stainless steel, iron, titanium and hard brass (towel rails etc).
What mop should I use? Satin Wheel
Cut factor 9 Gloss factor 2.

More...

130 gram Bar. Super Finish

High gloss with a small amout of cut.
Second stage polishing process.
Leaves a good finish.
Polish plastics and lacquers at slow speed. Approx 1000-1500 rpm max.
What material is it used for? Plastics, lacquers and woods.

What mop should I use? G loose or drop down to B loose if more cut needed.

More...

Super Finishing Compound 150g bar

What is this compound used for? Super high gloss finishing on lacquer and plastics. Final process. For people who want a complete scratch free finish, works very well on darker or black surfaces when minor scratches show, this compound will give you a clear gloss finish with no scratches.
Like with all plastic and lacquers run at a slow speed. 1000-1500 rpm max .
What mops can I use? Loose.
Cut factor 1 Gloss factor 10

More...

Special compound for brass, copper, aluminium, plastic, hard rubber.

Fine powder for jewellery applications and glass polishing.

More...

100gsm tube as recommended by Tormec

50ml tube. Great for reviving Brass, Bronze, Nickel Silver and Acrylics.

We always use this when preparing our knives for an exhibition

Conic spider for drilling machines/Right, for clockwise rotation. shaft diameter 6.25 mm

More...

Fits all power, pillar drills and all polishing machines with chucks, not Dremmels.

Right hand running.

More...

Fits all power, pillar drills and all polishing machines with 10mm chucks, not Dremmels.

Right hand running.

More...

Fits all power, pillar drills and all polishing machines with chucks, definitely not Dremmels.

Right hand running.

More...

This taper will fit bench polishing machines such as the KIRJES Grinding and Polishing machine, any electric drill but not a Dremmel. The extra length gives greater access to difficult areas such a bolsters when fitted.

Spec: Length total =125mm, Length of taper = 30mm, Diameter of shank = 6mm, Taper 3mm>10mm
Can be used with:
Mini polishing mops
Unmounted felts
Felt wheels 3" max

More...

A good tool for reviving all types of buffig mop. Use goggles/face mask when using this tool.

Dimensions: 370mm wide.

More...

Fits Dremel, Proxon and similar.
Shaft diameter 2.3 mm.

More...

Fits Dremel, Proxon and similar.
Shaft diameter 2.3 mm.

Very useful for cleaning Antler and other bone materials.

More...

Fits Dremel, Proxon and similar.
Shaft diameter 2.3 mm.

More...

Fits Dremel, Proxon and similar.
Shaft diameter 2.3 mm.

More...

Fits Dremel, Proxon and similar.
Shaft diameter 2.3 mm.

More...

Fits Dremel, Proxon and similar. (Please use face protection shields when working with this tool).

Shaft diameter 2.35 mm.

Very useful for cleaning up natural bone products such as Rams Horn and Wild-Boar Hogs Tusks

More...

25 x 12mm

A great little mop suitable for final polishing, good for difficult to reach areas.

Use the long taper.

More...

25 x 12mm

A great little mop suitable for final polishing, suitable for difficult to reach areas.

Use the long taper.

More...

25 x 12mm

A great little mop suitable for final polishing, suitable for difficult to reach areas.

Use the long taper.

More...

38 x 12mm

A great little mop suitable for final polishing, and difficult to reach areas.

Use the long taper.

More...

25 x 20mm

An aggressive mop that has been treat with resin, good for cleaning up pitted metals, suitable for difficult to reach areas.

Use the long taper.

More...

30 x 10mm

An aggressive mop that has been treat with resin, good for cleaning up pitted metals, suitable for difficult to reach areas.

Use the long taper.

More...

100 x 25mm uses Standard Taper.

A good fine grade wheel with good cleaning qualities, I use this type of mop to clean up my Carbon Blades after customers have fingered them. Used with an agressive compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

100 x 25mm uses Standard Taper.

A good medium grade wheel with good cleaning qualities, I use this type of mop to clean up my Carbon Blades after customers have fingered them. Used with an agressive compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Single lap 150 x 8mm uses Standard Taper.

A good very fine grade single lap wheel with good cleaning qualities, I use this type of mop to clean up my Carbon Blades after customers have fingered them. Used with an agressive compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Four lap 150 x 32mm uses Standard Taper.

A good very fine grade four lap wheel with good cleaning qualities, I use this type of mop to clean up my Carbon Blades after customers have fingered them. Used with an agressive compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Dimensions 100mm x 6mm

Hard thin felt wheels. Ideal for getting into placer thicker mops cannot reach. The hardness of the felt allows you to apply pressure which improves the cut.

439T Green compound for polishing
For bright finishing use the P164 Blue.

More...

100 x 25mm uses Standard Taper.

A good Stitched Cotton wheel with good cleaning and polishing qualities, I use this type of mop to clean up my Carbon Blades after customers have fingered them. Used with blue or pink compounds it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

150 x 25mm uses Standard Taper.

A good Stitched Cotton wheel with good cleaning and polishing qualities, I use this type of mop to clean up my Carbon Blades after customers have fingered them. Used with blue or pink compounds it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

100 x 13mm uses Standard Taper.

A good Stitched Cotton wheel with good cleaning and polishing qualities, I use this type of mop to clean up my Carbon Blades after customers have fingered them. Used with blue or pink compounds it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

125 x 13mm uses Standard Taper.

A good Stitched Cotton wheel with good cleaning and polishing qualities. Used with yellow, blue or pink compounds it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

150 x 13mm uses Standard Taper.

A good Stitched Cotton wheel with good cleaning and polishing qualities. Used with yellow, blue or pink compounds it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Dimensions: 100 x 25mm Standard Taper.

A good Felt wheel with good polishing qualities. Used with a pink/yellow compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Dimensions: 100 x 13mm Standard Taper.

A good loose Cotton wheel with good polishing qualities, I use this type of mop to polish up my Carbon Blades after customers have fingered them. Used with a pink compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

100 x 25mm uses Standard Taper.

A good loose Cotton wheel with good polishing qualities, I use this type of mop to polish up my Carbon Blades after customers have fingered them. Used with a pink compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Dimensions: 125 x 25mm Standard Taper.

A good loose Cotton wheel with good polishing qualities, I use this type of mop to polish up my Carbon Blades after customers have fingered them. Used with a pink compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Dimensions: 150 x 25mm Standard Taper.

A good loose Cotton wheel with good polishing qualities, I use this type of mop to polish up my Carbon Blades after customers have fingered them. Used with a pink compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

Dimensions: 150 x 13mm Standard Taper.

A good loose Cotton wheel with good polishing qualities, I use this type of mop to polish up my Carbon Blades after customers have fingered them. Used with a pink compound it does a good job.

I always use a visor when using this mop due to the amount of resulting waste flying in the air.

More...

100 x 25mm.
A very popular and versatile grade of polishing mop, similar to the colour mop but slightly softer. Good for a one shot polishing operation where you need brightness back and the condition of the metal is not marked/scratched or badly pitted.
For stainless steel, copper, brass, iron, steel and aluminium.
This mops can be used with Green 800g, Menzerna Ulto12, Menzerna P14 and Menzerna 439T Green.
Our White mops are 100% white soft cotton, no hard pieces.
The mops have leather centre washers and have been finished so they can be used straight away.

More...

150 x 35mm. A brilliant tough mop

A very popular and versatile grade of polishing mop, similar to the colour mop but slightly softer. Good for a one shot polishing operation where you need brightness back and the condition of the metal is not marked/scratched or badly pitted.
For stainless steel, copper, brass, iron, steel and aluminium.
This mops can be used with Green 800g, Menzerna Ulto12, Menzerna P14 and Menzerna 439T Green.
Our White mops are 100% white soft cotton, no hard pieces.
The mops have leather centre washers and have been finished so they can be used straight away.

More...

Dimensions: 150 x 15mm with reinforced centre to accept pigtails.

More...

Dimensions: 150 x 20mm. This has a centre hole for a pigtail.

More...

Dimensions: 100 x 25. With centre hole for both types of Taper.

More...

Dimensions: 75 x 12.5. With centre hole for both types of Taper.

More...

Dimensions: 30 x 12mm.

A very popular and versatile grade of polishing mop, similar to the colour mop but slightly softer. Good for a one shot polishing operation where you need brightness back and the condition of the metal is not marked/scratched or badly pitted.
For stainless steel, copper, brass, iron, steel and aluminium.
This mops can be used with Green 800g, Menzerna Ulto12, Menzerna P14 and Menzerna 439T Green.
Our White mops are 100% white soft cotton, no hard pieces.
The mops have leather centre washers and have been finished so they can be used straight away.

More...

Dimensions: 38 x 12mm.

A very popular and versatile grade of polishing mop, similar to the colour mop but slightly softer. Good for a one shot polishing operation where you need brightness back and the condition of the metal is not marked/scratched or badly pitted.
For stainless steel, copper, brass, iron, steel and aluminium.
This mops can be used with Green 800g, Menzerna Ulto12, Menzerna P14 and Menzerna 439T Green.
Our White mops are 100% white soft cotton, no hard pieces.
The mops have leather centre washers and have been finished so they can be used straight away.

More...

Dimensions: 38 x 25mm.

A very popular and versatile grade of polishing mop, similar to the colour mop but slightly softer. Good for a one shot polishing operation where you need brightness back and the condition of the metal is not marked/scratched or badly pitted.
For stainless steel, copper, brass, iron, steel and aluminium.
This mops can be used with Green 800g, Menzerna Ulto12, Menzerna P14 and Menzerna 439T Green.
Our White mops are 100% white soft cotton, no hard pieces.
The mops have leather centre washers and have been finished so they can be used straight away.

More...

12.5 x 75 Canvas. Excellent for Brass, Nickel Silver and Pewter.

More...

12.5 x 75 Close Stitched Cotton. Excellent for Wood, Brass, Nickel Silver and Pewter.

More...

12.5 x 100 Canvas. Excellent for Brass, Nickel Silver and Pewter.

More...