Specifications and Materials

Style: Hunting

Blade: Very Rare Damascus steel with a Scandi grind. 85 x 25 x 4mm. Overall Length 212mm. Scandi Grind with 232 Layers

Handle: Sapphire Smoldering Dragon Acrylic with Nickel Silver Corby bolts

Sheath: Factory made Spanish Leather

Delivery: AVAILABLE NOW.

More...

Style: Hunting/Skinning/Bushcrafting/Collecting.

A very special one-off

Blade: San Mai Trapper 95 the name refers to the hard steel (stainless 440 C) forming the blade's edge and the iron/stainless forming a jacket on both sides.

Dimensions: Blade length: 95mm, width: 25mm Blade thickness: 3.5mm, Total: 210mm

Scales: 7mm Nickel Silver Bolster with Mosaic Pins and Stabilised Woolly Mammoth Molar Scales using Nickel Silver Corby Bolts.

Sheath: Western Style. Vegetable tanned leather 3mm thick wet moulded to match blade, special Nickel and leather belt loop, hand stitched, dyed OX-Blood. Snug fit, treated with Aussie wax.

Delivery: AVAILABLE NOW!!

More...

Style: Working, or Bushcrafting.

Blade: Shark Boot Blade 90 x 28 x 5m. AUS8 Stainless Steel

Total length: 190mm

Scales: Inferno Acrylester with Aluminum Corby Bolts

Sheath: Western Style. Vegetable tanned leather 3mm thick wet moulded to match blade, treated with Aussie wax. Supplied with a split ring for easy use and 1 metre of Paracord.

Delivery: AVAILABLE NOW!!

More...

Style: Hunting/Skinning/Bushcrafting/Collecting.

A very special one-off

Blade: Feather Flower Nordic 95.

Dimensions: Blade length: 95mm, Width: 25mm Blade thickness: 4mm, Total: 210mm

Scales: 8mm Water Buffalo Bolsters with Nickel Silver Pins and Stabilised Woolly Mammoth Scales using Nickel Silver Corby Bolts.

Sheath: Western Style. Factory made with 3mm welt and simple belt loop.

Delivery: AVAILABLE NOW!!

More...

Specifications and Materials

Style: Bushcrafting, Hunting and Collecting.

Blade: Choctaw drop point, Damascus steel with a slight concave scandi grind

Handle: 10mm (3/8) Brass Bolster and Finger Guard combined. Held in place with a brass rod through the blade, with Ice Ripple Acrylic Scales fixed to blade with 6.35mm Brass Corby bolts and Lanyard hole. then bonded to blade for extra strength. Making this a very well balanced and practical knife, especially with the low maintenance scales.

Sheath: Hand sewn 3mm veg tanned leather wet moulded to fit knife with a brass snap loop retaining strap and two position belt loop with high and low settings, dyed black to compliment the handle, then, when cured and hardened treated with Aussie wax for resistance to moisture. Highly polished for that extra touch of class.

Delivery: AVAILABLE NOW.




To confirm that you are over 18 years old, please enter your date of birth in the box below.

Style: Hunting/Skinning/Bushcrafting/Collecting.

A very special one-off

Blade: Stars and Stripes 95 Damascus Steel the name refers to a new Damscus Pattern.

Dimensions: Blade length: 95mm, width: 25mm Blade thickness: 3.5mm, Total: 210mm

Scales: Stabilised Spalted Beech wirh Brass Corby Bolts.

Sheath: Bushcraft Style. With double belt loop and extra welt

Delivery: AVAILABLE NOW!!

More...

Style: Hunting

Blade: Cudeman-254 Length:10 cm, Overall Length: 21.5 cm, Thickness: 4 mm, Width: 3 cm, Grind: Full Flat, Finish: Polished, Shape: Drop-Point, Steel: N690co Böhler, Hardness: 60 Hrc

Scales: Stabilised Box Elder Blue and Black with Nickel Silver Corby Bolts.

Sheath: Factory made Spanish Leather

More...

Specifications and Materials

Style: Survival and Hunting

Blade: Cudeman Trekker: Stainless 440 steel. Thickness 4.75. Total length 225 mm. Blade 110 x 28mm. Stainless bolster, with lanyard fixings front and back.

Scales: Bog Oak with 1/4" Nickel Silver Corby Bolts

Sheath: 3mm veg tanned leather wet moulded to fit knife with Oblong ring and belt loop dyed Black to compliment the knife handle, then treated with Aussie wax providing suppleness and waterproofing.

Delivery: AVAILABLE NOW or 8 weeks if sold out.

More...

ABATTOIR TRIPE / GUT KNIFE
With ball ended blade

Dimensions and Specifications:

Blade: 150mm, total length 290mm

Steel: Mora Frost Stainless Steel

Handle: Moulded Plastic

Guard: Simple shape Red leather.

More...

Dimensions and Specifications:

Blade length: 165 mm

Blade width: 29,5 mm

Blade thickness: 4,8 mm

Total: 305 mm

Steel: 440C Stainless

Bolster: Nickel Silver

Scales: Ebonite Toffee Ripple

Fixing Pins: 5mm Nickel Silver

SHEATH

Handmade using 3.5mm Veg tanned leather plus welt, 1.5 inch belt loop and wet mouded to fit the knife, dyed dark brown with nickel plate fittings.

More...

Dimensions and Specifictions:

Blade: 87mm

Thickness: 3.5mm

Depth: 32mm

Overall length: 250mm

Grind: Scandi with a hollow bias and fine secondary bevel.

Steel: 440 stainless.

Handle: Acrylic Venom Scales. Held in place with a brass 1/4" Nickel Corby Bolts then bonded to blade for extra strength. Making this a very well balanced and practical knife, especially with the low maintenance scales.

Sheath: Hand sewn 3mm veg tanned leather wet moulded to fit knife a two position belt loop, then, when cured and hardened treated with Aussie wax for resistance to moisture. Highly polished for that extra touch of class.

Delivery: AVAILABLE NOW.

More...

Dimensions and Specifictions:

Blade: 95mm

Thickness: 3.5mm

Depth: 28mm

Overall length: 210mm

Grind: Scandi to zero.

Steel: N690Co.

Handle: Orange G10 Scales with black liners. Held in place with a brass 1/4" Nickel Corby Bolts then bonded to blade for extra strength. Making this a very well balanced and practical knife, especially with the low maintenance scales.

Sheath: Factory Made using 3mm veg tanned leather wet moulded to fit knife a two position belt loop, then, when cured and hardened treated with Aussie wax for resistance to moisture. Highly polished for that extra touch of class.

Delivery: AVAILABLE NOW.

More...