HomeSite MapSearchCheckout Store TopUp a LevelContact Us
Online Catalogue | For tool making supplies |
Stainless Steel. A different way of finishing off a handle.Base 13mm x 21mm which is hollow and a fixing hole on the top.
Stainless Steel. A different way of finishing off a handle.Base 12 x 21mm which is hollow and a fixing hole on the top.
Brass. A different way of finishing off a handle.Holes 20x15mm, Height 28mm
A stylish way to enhance any lanyard material, such as ParacordLength: 12,5 mmDiameter: 11 mmHole: 6 mm
diameter 32 mm, including the insert bolt.
diameter 28 mm, including the insert bolt.
diameter 24 mm, including the insert bolt.
Fits Enzo Nordics and Solingen Blades.
Another original English Handmade Knives product. An Endcap to give weight and balance to any knife handle. Each cap is supplied with one 4 x 100mm length of Nickel Silver rod, which can always be substituted for 4mm Mosaic Pins. Dimensions:40 x 18 x 7mm with two 4mm holes 9mm in form each end 12mm apart.These have been produced via a CNC milling maching and will need some finishing, but after gives a stunning result.
39 x 25 x 2 mm Hole 4 mm
Base 20 x 29mmHeight 7mm
Hole 20 x 3 mmBase approx 21 x 15mmHeight approx 20mm
Inner width and height approx 13 x 25mmOuter width and height approx 17 x 31mmLength approx 5mm at the bottom and 21mm at the top
Dimensions: 32 x 21 x 3mm. Suitable for adapting with the use of two fixing Mosaic pins. To avaoind any chance of movement.
28 x 23 x 2 mm Hole 4 mm
28 x 23 x 2 mm. Hole 4 mm
30 x 19 x 3 mm Hole 4 mm
25 x 13 x 3 mm Hole 4 mm
32 x 21 x 3 mm Hole 4 mm
Suitable for Leuku blades 55x33 mm.
Small pommels that can be used to finish off Endcaps with tang through, then bonded or heated, finally gently remove tip of tang and polish.