£8.00

Pack of 10

Total length 10,6 mm
Barrel outer diameter 6,3 mm
Barrel length 9,6 mm
Head diameter 10 mm
Drillbit 6,3 mm
Snap setter 1/4 inch
Max material thickness 7,6 mm


find out more

Perfect for Bolsters and Endcaps
find out more

£7.00

30 x 19 x 3 mm

Hole 4 mm


find out more

£15.00

Dimensions: 22 x 40 x 125 mm

Drills and sands like any other Acrylic but not must get to hot in the making process.

This will polish up and look very unusual.


find out more

£5.00

Head diameter 1/4 (6.3 mm) depth 1/4, middle 4.60 x 8.5mm. Fits EnZo fulltangs.

Sold as a single piece


find out more

£26.00

A plain cylinder of bone, can be shaped or used as is for a chefs knife.

Size: 32 x 110mm.

find out more

Sizes from 2 to 8mm. Cut to 100mm lengths
find out more

Nickel Silver (NS), Stainless Steel (SS), Brass (B), Copper (C) and Aluminium (A).

Thicknesses from 6.35 to 8mm

find out more

£6.00

30 x 19 x 3 mm, slot 3,3 x 13 mm

Fits Type: Baudin 80, Styrefors, Vikström 70, 95 Andersson, Helle Turman, Odel



find out more

£17.00

6mm x 125mm. Difficult to photograh due to the size. This pin will turn any bolster, handle or endcap into something special.


find out more

£52.00

The newly redesigned FL005 Framelock Folding Knife Kit includes all of the parts needed to create the above frame-lock pocket knife kit, including standard dymondwood handles. This kit assembles easily and offers a lot of canvas for modifications.

This model is an excellent piece for filework training, testing liner treatments and for overlay experimentation. Because of the base simplicity, it is also a great kit for beginners, requiring no modification to produce a great knife. It features a fully stainless frame-lock design with open-spacer backspine. It is very fun to build and offers a great lockup and action.

Printed Instructions Included

Skill Rating: Level I
Blade Steel: 440 Stainless (heat-treated to RC 56-58)
Handle Length: 4 1/2
Blade Length: 3 3/8
Overall Length: 7 3/4
Handle Material: Dymondwood (standard)
Optional Handle Materials (available)
Pivot: Stainless Steel (pass-through)
Washers: Nylon

Standard assembly requires TORX 6 and TORX 8 drivers.
find out more

£10.00

Sizes vary approximately 210x 150mm.

find out more

£150.00

Our Woodland Axe - a powerful and versatile tool designed for outdoor enthusiasts and survivalists alike. Crafted with precision from high-quality stainless steel, this Axe combines durability with sharpness, ensuring reliable performance in any situation. The sleek stainless-steel construction not only enhances the tool's strength but also provides resistance against corrosion, making it a reliable companion for adventures in diverse environments. The ergonomically designed handle ensures a comfortable grip, allowing for efficient and controlled use. Whether you're chopping wood for a campfire or tackling wilderness challenges, a our axe is the perfect blend of strength, durability, and craftsmanship, ready to handle your cutting needs with ease

Blade length: 70 mm

Head width: 98 mm

Blade thickness: 4,7 mm

Total length: 250 mm

Steel: Stainless

Scales: English Holm Oak with Brass Corby Bolts

Weight: 320g

Cover/Protector: 3mm Veg Tanned Leather, specially designed and hand-sewn to fit the blade.






find out more

£28.00

One piece: 35 x 17 x 22mm

Two pieces: 12 x 8 x 43mm

One piece: 21 x 10 x 23mm





find out more

£0.46

All purpose heavy duty flat split rings. Priced each



find out more

£25.00

This bag contains a lot of offcuts that are at least 11inches wide and provide the buyer with many opportunities when making sheaths. The thicknesses are mostly 3mm and some small amounts of 2.3mm

The weight is 2 kilos

I am clearing out my workshop and will relocate soon.

find out more

£9.00

Size 228mm x 40mm x 9mm.

Indonesian Hardwood

The same tree as Sonokeling rosewood but having darker and heavier wood due to different growth conditions.

Indian rosewood is historically one of the main rosewoods of commerce and was traded alongside Brazilian rosewood for hundreds of years. Felling is now strictly controlled by the Indian government and logs are sold by auction to a small number of government approved bidders only. Export is also stritctly controlled by the Indian government to reinforce the value and precious nature of this timber so that it will remain available for a long time into the future.

find out more

£24.00

Dimensions: 3.2 x 140 x 400mm


find out more

£24.00

Dimensions 3.2mm x 140mm x 400mm.




find out more

£24.00

Dimensions: 3.2 x 140 x 400mm.


find out more

£15.00

Fits blades 110-120mm.x 20mm

The kit consists of a pre-marked 3mm Veg tanned leather blank with stitching holes defined and the inside has been prepared to help with the folding of the leather.

A belt loop is also supplied with two rivets that enables the user to decide if left or right-handed use if required.

Some basic instructions:

1. Rivet the belt loop in the desired position.

2. Enlarge the pin pricks with an awl to allow the needles to pass through easily.

3. Soak the sheath in some warm water for about 5 minutes.
This will make the leather very soft and supple.

4. Start sowing from the tip when you reach the top sew back a few stitches to hold it all tight.

5. Wrap your knife in cling film and gently work the knife into the sheath.
Then work with you fingers to mould the leather to take on the shape of your handle.

6. You can leave the leather in it's natural state. It will take on a patina that will darken with time, or
alternatively it can be dyed at this stage, but it's advisable to take the knife out before doing so.
Whatever you decide to do, the knife should only be left in the damp sheath for a couple of hours, then take it out carefully and if you can hang it in a warm place to harden.

These instructions will be included with your kit




find out more

£150.00

Our Woodland Axe - a powerful and versatile tool designed for outdoor enthusiasts and survivalists alike. Crafted with precision from high-quality stainless steel, this Axe combines durability with sharpness, ensuring reliable performance in any situation. The sleek stainless-steel construction not only enhances the tool's strength but also provides resistance against corrosion, making it a reliable companion for adventures in diverse environments. The ergonomically designed handle ensures a comfortable grip, allowing for efficient and controlled use. Whether you're chopping wood for a campfire or tackling wilderness challenges, a our axe is the perfect blend of strength, durability, and craftsmanship, ready to handle your cutting needs with ease

Blade length: 70 mm

Head width: 98 mm

Blade thickness: 4,7 mm

Total length: 250 mm

Steel: Stainless

Scales: English Plumbwood with Brass Corby Bolts

Weight: 320g

Cover/Protector: 3mm Veg Tanned Leather, specially designed and hand-sewn to fit the blade.






find out more

£1.25

Sold Singly.

A Medium 'D' Ring which will accept One and a Quarter Inch leather.

Good for the larger style western sheath that accepts the bigger blades such as Bowies etc.

Also good for harnesses and kit bags.



find out more

£95.00

INCLUDES:

* Extra Large Ferro Rod with Antler Handle and Hand Stitched Belt Loop.

* High Carbon Hand Forged Steel Striker.

* Natural Jutte Kindling.

* Jutte Rope Flame Starter.

* Fat Wood Resin Sticks.

* Charcoal Ember Cloths.

* Shrink Wrapped Wood Shaving Blocks.

* Telescopic Fire Blow Tube.

* Natural Hemp Draw String Bags, can be used as Fire Starting Material.

Please note that this kit will also be available at the Wilderness Gathering 14th-17th of August.

https://www.wildernessgathering.co.uk/
find out more

£70.00

INCLUDES:

* Extra Large Ferro Rod and Striker.

* High Carbon Hand Forged Steel Striker

* Natural Jutte Kindling.

* Jutte Rope Flame Starter.

* Fat Wood Resin Sticks.

* Charcoal Ember Cloths.

* Shrink Wrapped Wood Shaving Blocks.

* Telescopic Fire Blow Tube.

* Natural Hemp Draw String Bags, can be used as Fire Starting Material.

Please note that this kit will also be available at the Wilderness Gathering 14th-17th of August.

https://www.wildernessgathering.co.uk/
find out more

£25.00

INCLUDES:

* Ferro Rod and Striker.

* Natural Jutte Kindling.

* Fat Resin Stick.

* Shrink Wrapped Wood Shavings Rolls.

* Natural Hemp Draw String Bag, can be used as Fire Starting Material.

Please note that this kit will also be available at the Wilderness Gathering 14th-17th of August

https://www.wildernessgathering.co.uk/
find out more

£1.95

Good for all sorts of sheath applications.

Commonly known as Sam Browne Stud Brass (screwback)

Small, approx. 7mm in height and 6.35" base diameter. Ball Head 5mm

Sold individually.


find out more

£3.95

Good for all sorts of sheath applications.

Commonly known as Sam Browne Stud Brass (screwback)

Small, approx. 8mm in height and 6.35" base diameter.

Sold individually.


find out more

£2.00

Head Dimension 10mm
Shaft Dimension 6mm

Screw fitting.

Supplied as a set of 4


find out more

£2.20

Head Dimension 10mm
Shaft Dimension 8mm

Screw fitting.

Supplied as a set of 4


find out more

£2.50

Head Dimension 10mm
Shaft Dimension 10mm

Screw fitting.

Supplied as a set of 4


find out more

£24.00

Dimensions: 3.2 x 140 x 400mm


find out more