Sheet Size 230 x 280mm

Now one of the main abrasives for knifemakers.

I cut this into strips and because of its flexibility it is great to work with, the finish on metal and wood is superb

The unique patented sanding material contains thousands of small holes which hold the dust and other particles without clogging the disc surface. The result is seen as a very uniform sanding pattern and a perfectly smooth surface. Since the amount of airborne dust has been minimized, the workshop stays cleaner too. A tap over the dust extractor hood will suck the sheet clean ready for more work. Abranet® was been developed for sanding all woods and composite materials.

Sold in 250 x 115mm Strips. UF = Ultra Fine.

I cut this into strips and because of its flexibility it is great to work with.

For an excellent surface finish, use Mirka Mirlon Rolls; a supple, three dimensional fibre sanding material. With its individual structure, Mirlon is recommended for use on profiled surfaces. It is easy to use and gives an excellent start to the final finishing stages of a knife handle.

More...

Now one of the main abrasives for knifemakers. Sheet size 125mm x 70mm.

I cut this into strips and because of its flexibility it is great to work with, the finish on metal and wood is superb

The unique patented sanding material contains thousands of small holes which hold the dust and other particles without clogging the disc surface. The result is seen as a very uniform sanding pattern and a perfectly smooth surface. Since the amount of airborne dust has been minimized, the workshop stays cleaner too. A tap over the dust extractor hood will suck the sheet clean ready for more work. Abranet® was been developed for sanding all woods and composite materials.

More...

Now one of the main abrasives for knifemakers. Sheet size 125mm x 70mm.

I cut this into strips and because of its flexibility it is great to work with, the finish on metal and wood is superb

The unique patented sanding material contains thousands of small holes which hold the dust and other particles without clogging the disc surface. The result is seen as a very uniform sanding pattern and a perfectly smooth surface. Since the amount of airborne dust has been minimized, the workshop stays cleaner too. A tap over the dust extractor hood will suck the sheet clean ready for more work. Abranet® was been developed for sanding all woods and composite materials.

More...

Heavy backed zirconia blue belts, work well on hard metals and with care wood. I use these all the time in our worshops.

Width-100mm

Length- 915mm

Grit- 120

More...