Online Catalogue | Knife making supplies | Spacers and Liners
HomeSite MapSearchCheckout Store TopUp a LevelContact Us
Quantity:
Sizes vary approximately 210x 150mm.
Sizes vary approximately 40 x 120mm.
Cut the same size as scales, can be used as spacers or scales. Measures 126mm x 33mm x 10mm Sold individually.
Dimensions: 5 x 60 x 150mmGood for all types of knife, care must be taken when sanding - do not allow to get to hot.I have tested this material and it produces a matt finish. More...
Sizes vary approximately 40 x 125mm.
Just as good as fibre a very bright white. Needs sanding carefull do not let it get hot. Sizes vary approximately 210x 150mm.
Just as good as fibre a very bright purple. Needs sanding carefull do not let it get hot. Sizes vary approximately 210x 150mm.
Sheet size 250mm x 125mm
Basic Dimensionsapprox 30 mmPlease email me for additional pictures and info
Basic dimensions 28mm diameter, 28-33mm longPlease email me for further pictures and info.
Real material mixed with acrylic. Can be sawed, drilled, shaped and polished with tools for wood. Small pieces of artifically produced stone.5 x 65 x 75 mm This material is a combination of Jet, Onyx and Obsidian creating a material basically black with white and gold flecks and streaking. Carves well and polishes beautifully.As used in the Warren and Rye knives.
Real material mixed with acrylic. Can be sawed, drilled, shaped and polished with tools for wood. Small pieces of artifically produced stone.5x65x75 mm A very rare, dark blue, sometimes with violet tints, spotted with white and brass. Lapis Lazuli takes a fantastic polish. As used in the Warren and Rye knives.
Acrylic. Can be sawed, drilled, shaped and polished with tools for wood. Would contrast a very dark wood that has tinges of blue greenSmall pieces of artifically produced stone.5 x 65 x 75 mm As used in the Warren and Rye knives.
Dimensions: 6 x 85 x 65mm. Makes terrific spacers and insets, polishes up really well. More...
Real material mixed with acrylic. Can be sawed, drilled, shaped and polished with tools for wood. Small pieces of artifically produced stone. 45mm x 80mm x 6mm min.
Real material mixed with acrylic. Can be sawed, drilled, shaped and polished with tools for wood. A swirl of deep purple with lighter purple bands interlaced and overlapping the deeper color 5x55x70 mmPolishes up really well.
Real material mixed with acrylic. Can be sawed, drilled, shaped and polished with tools for wood. Colored deep green to olive5x65x75 mm
Real material mixed with acrylic. Can be sawed, drilled, shaped and polished with tools for wood. A rich golden honey color included with dark specks to resemble the ancient Baltic amber. 5 x 35 x 70 mm
A single block with lots of uses, as thin spacers, or as much bigger bolster spacers or end caps. Polishes up really well and would give any knife project that something extra in a stylish finish.
Real material mixed with acrylic. Can be sawed, drilled, shaped and polished with tools for wood. 5 x 35 x 70mm.
Dimensions: 50 x 45 x 5mm.
Dimensions: 40 x 50 x 6mmSee http://www.english-handmade-knives.co.uk/Hythe.html for effect.
One single peice, would make at least 5 x 25mm spacers. Size: 134 x 40 x 10mm.Part seasoned.
A set of two spacers with an attractive quilting effect. In therory these could be used as scales, this burling tends to have small fisures and there is one in this pair. 6 spacers can be cut and would provide very effective dividers when used.
One block available this will make several spacers 104 x 30 x 20mm. If care is taken this could also be used for a knife handle.Part Seasoned.
A large single block that can be cut in three making this excellent value. Size: 100 x 42 x 14mm.Part Seasoned.
A single block showing some nice burling with many uses, can be cut into 4 peices, scales for a small fultang or a handle for a necknife.95 x 70 x 17mm. Part seasoned.
A single block a bit thicker than block 1 with many uses, can be cut into 2 peices, scales for a small fultang or a handle for a necknife.97 x 47 x 25mm. Part seasoned.
One single block available. Can be used across the grain or with it, either 4 small or two large spacers.Block dimensions: 70 x 70 x 24mm.
A mixture of the natural crushed stone and a strong acrylic resins to provide an interesting alternative to its counterpart. Bright green basic cooper carbonate (Cu²CO³(OH)² occurring as a mineral 5x65x70 mm
35 x 30 x 1.5 mm
Pefect for dividers and spacers to give your knife projects that extra style.1.5mm x 150mm x 150mm.
Pefect for dividers and spacers to give your knife projects that extra style.0.5mm x 50mm x 150mm.
Pefect for dividers and spacers to give your knife projects that extra style.0.5mm x 50mm x 150mm. More...